Kaisi GBA IC chip adhesive removing liquid 20ml
Description:
- BGA IC Adhesive removing liquid softens and removes resinating and sealing glue of chip BGA IC of mobile phones.
- The ingredients of it is environmental protection and safest. It has good permeability;
- it can quickly soften and loosens solidified resin adhesive such as phenolics, epoxy, acrylate, polyurethane, organosilicon.
- It does not to harm to circuit board and component, even to maintenance worker.
- capacity:30ml
How to use:
1. Use a tweezers to pick a piece of cotton wool with bigger size to BGA chip and Dip it into the glue remover.
2. Put the cotton wool on the BGA chip and cover through
3. Place a plastic bag or film on the top and cover the PCB board
4. Wait for 20mins.
5. REDO step 1 to 4
6. Use a tweezers to remove softened sealing glue around the BGA
7. Use Hot air gun (300Deg. C) to heat up the chip. The Glue at the bottom will melt and soften by heat
8. Use a Tweezers / cutter to remove the chip
Attention: glue removing liquid , it shall not touch skin , eye , close it after using . if touched by accident ,pls use water clean it .
Rounded.com
Verrijn Stuartweg 3
4462 GE Goes
Nederland
KvK: 71612564
BTW: NL858783071B01
Helpdesk | Contact opties
Binnenland: 0113-212810
Buitenland: +31113212810
Neem
contact op via email
Online chat